Blog
|
Beginner Lampwork tips from Facebook
A few weeks back we asked our Facebook friends for some helpful tips for lampwork beginners.
If you have a tip or technique you would like to share, post it on our page Frantz Art Glass Facebook Fan Page.
Thanks to all that participated.
Annie Kuhn
Keep your fingers out of the fire.
Kelly Taylor Kruggel
Beginners Tip: Do Not Be Afraid.
Barbara Desvaux de Marigny
As a beginner it would have helped me if I had understood how important it is to the various techniques to be able to “read” the temperature of the glass bead. Once I learnt this, I found encasing, adding murrini and other techniques much easier to master. Also get to know the areas of your flame and don’t forget how much heat there is just under the flame which is handy when decorating beads especially with stringers.
Sara Conklin
Worst burns ever were when i thought i could answer and then talk on the phone and melt glass. Let the answering machine do its job. Focus on the task at hand.
Elizabeth Beads
Beginners tip: glass wants to be round. Rotate evenly and let your bead round itself out in the flame.
Wendy Maurer
Didn’t realize Frantz had a Facebook page, thanks for mentioning it in your newsletter. Beginner tip: when soaking beads to remove them from the mandrel or once off the mandrel to clean them – add a couple drops of dishwashing liquid to the water, it makes them easier to clean. Tip 2 – if your light turquoise gets a scummy film on the outside, once you take your beads off the mandrel, soak them for about 8 hours in some cola and the scum disappears. If you get scum in the first place, watch to see where in the flame you are holding your rod and adjust it, same if you get red spots in turquoise. You may also have to add more oxygen.
Mary Ann Schwalbach
If you try to imbed silver wire inside a glass bead, it’ll crack as it cools……I’m thinking silver has a different COE as 103
Carol Christensen-Day
Beginner’s Tips: I don’t think I have any advice that I haven’t already seen. But some of that advice I wish I had followed from the very beginning. Take notes. I have some beads with an effect that I love – and cannot reproduce. (I have many more beads that are attempts to reproduce a favorite effect). I now take notes. A simple notebook starting each entry with the date, the glass I’m using, the experiments. I also note when I change my kiln settings – e.g. a little hotter, a little longer. My notes tend to trail off into a session but I find that if a bead turns out great, I can zero in on what I was using and doing to create that bead. I also note on the previous day’s notes how the beads came out of the kiln – e.g. bright, dark, more blue, etc.
Another piece of advice is LABEL the rods. Maybe because I love buying and trying new glass I have a lot of 1/4 pounds. Its amazing how similar dissimilar rods can be.
My last piece of advice is buy from Frantz. Yes a shameless plug, but they have provided great service and been really helpful whenever I was in a fix.
I and even though I don’t
Cynthia Hass Bishop
Grow ALOE VERA plants outside your studio door! Shocky glass can fly and burn you unexpectedly.
Leza Harary
Here’s my tip: don’t get the bead release too thick on the mandrel. It’ll break right in the middle of your coolest bead!!
|
10 New Messy Colors (3-8-13)
-
- Truffle Ltd Run (511709)
-
- Berry Mist Ltd Run (511609)
-
- Seashell Ltd Run (511710)
-
- Dark Velvet Ltd Run (511610)
-
- Breeze Ltd Run (511517)
-
- Mediterranean Ltd Run (511516)
-
- Dried Sage Ltd Run (511415)
-
- Oyster Mushroom Ltd Run (511414)
-
- Honey Mustard Ltd Run (511306)
-
- Sherbert Ltd Run (511417)
|
Effetre New Colors (1-29-13)
5 New colors from Effetre.
-
- Green Cave by Effetre
-
-
Moss Green by Effetre
-
- Turquoise Gray by Effetre
-
- Antique Green by Effetre
-
- Umber Light by Effetre
With this new Shipment, here are 3 new variations of classics.
-
- Calico by Effetre
-
-
Purple Premium Opaque by Effetre
-
- Copper Green Red RED by Effetre
|
New Messy Colors (1-9-13)
New Messy Colors (1-9-13)
 Sprout Ltd Run (511411) |
 Bloodstone Ltd Run (511110) |
||
 Laguna Ltd Run (511514)
|
|||
 |
|
 |
New Messy Colors and Limited Runs (7-23-12)
New Messy Colors
 Peachy Keen (511204) |
 Cardamom (511407) |
 Poseidon (511509) |
 Linen (511807) |
New Limited Runs
 |
 |
 |
|
 |
 |
|
|
New Limited Runs (Former Uniques)
The following colors are not new colors, but old Uniques that CiM is rebranding as Ltd. Runs. Creation is Messy is reorganizing their website (www.creationismessy.com) to make it easier to find all of their various colors. Rebranding old Uniques to new names will make it easier for customers to keep track of the Messy color palette.
 Formerly |
Formerly |
Formerly |
Sunny Side Up Ltd Run (511304) Formerly |
|
|
 Formerly |
Formerly |
 Formerly |
 |
Bead Photography Tip: All white background tip
I like shooting beads on a white background. It provides a uniformed look with other photos, background colors don’t interfere and it allows me to easily isolate the the bead in Photoshop for compositions like ads or banners. But one problem I come across from time to time is losing the details in the edge of the bead. This usually happens because the bead itself is pale and it looks like the white is swallowing the bead.
Bead with out black edge
After some experimenting I came across a simple solution. I place a large piece of black cardboard behind it out or frame. By doing this it ads enough dark reflection to define the edges on the light background.
Bead with Black background edges
As you can see in these examples the edges are more defined. Which makes it easier to adjust the contrast with out losing detail.
Soft edges without black background
With the Black out of the frame the edges are more defined.
This even works great for totally clear beads
 |
Photography tip for shooting clear dichroic
After photographing some Dichroic Scraps and I discovered something I wanted to share.
The Dichroic Scraps will be on sale in the Fun House so they needed some photos. The scarps were of dichroic on clear. I had a problem was when I was photographing them on white I was loosing all detail.
So what I did was place a black piece of foam-core out of frame to see if I could get a little contrast and something really cool happened. The color on the Dichroic Scraps jumps out.
Here is what append when I placed a black piece of foam-core behind it.
As you can see it made an amazing difference. So if you’re having problems photographing dichroic beads try putting something dark next to it out of frame.
 |
Torso Beads by Joy Munshower
One of our customers, Joy Munshower, posted some wonderful torso beads made with the Effetre glass rod colors ( Sunset, Alexandrite, Green Tea, Earth, Dark Ivory, and Neptune) and Vetrofond glass rod ( Topaz ODD ). They were such great examples of these colors I thought I would share them in this blog.
The murrini used were by Donna Millard
Effetre Neptune (591230)
"Here's the fun side-by-side, before-and-after shots of a female torso sculpted out of "Neptune" glass. When I sculpt it it develops the "pewter" finish over its surface (and "haloed" around the Morning Glory murrini by Donna Millard interestingly)… I then etched the bead to expose the gorgeous mottled teal beneath." – Joy Munshower
Effetre Alexandrite (591226)
I would like to see this bead in person because Effetre Alexandrite shifts hue slightly with different light.
Effetre Earth Cool Color (591688)
Effetre Sunset Pastel (591206)
Effetre Green Tea Cool Color (591680)
This Green Tea bead looks like it was sculpted out of a Marble.
Vetrofond Topaz ODD (791989)
Effetre Dark Ivory (591276)
For more images check out her Facebook page.
 |
What is Zanfirico Cane?
I became aware of the existence of a type of Italian decorative cane called “Zanfirico” the first time I visited Murano back in the early 1990’s. It is stored in the same warehouse at Effetre with the murrini cane and was a titillating eye candy experience.
Zanfirico cane in the Effetre warehouse.
Zanfirico is a hand pulled cane style that requires a lot of skill to produce and is very popular with the traditional glass blowers on Murano, who do beautiful blown glass pieces with ribbons of fine twisting colors in stunning vases, bowls and other glass objects.
Frantz Art Glass has had Zanfirico cane available for many years, but it was marketed as “Marble Stock” in our catalog and on our website. The colors of Zanfirico that Frantz had in the past was not as delightful as the new batch that is now available and there is a better selection of cane sizes to pick from with this new shipment.
Since there are all these new styles and colors of Zanfirico, I decided to see what I could do using this cane style to make beads. I had a lot of fun seeing how I could make fancy 2 mm stringers out of 15 to 20 mm thick pieces that were 2 – 2 ½ inch long of zanfirico cane. I heat these short thick pieces of zanfirico cane in my annealing kiln at 1000F and then pick them up out of the kiln with a glass punty that is heated at the pick-up end to sticky hot. I then transfer the zanfirico chunk to the torch flame and start warming it and add a glass punty to the other end. When the zanfirico chunk starts to get soft, I start to introduce more twists into the cane and when it is ready to pull out, I continue to add more twists to make them compact enough to look good in a bead. This treatment takes a little practice, but is well worth it.
Here is a side by side photo of the larger zanfirico cane and the stringers I pulled out of it.
While I was experimenting with the zanfirico cane, I discovered that some of the cane patterns actually looked better when I applied a 5 to 6 mm cane directly to a thin bead cylinder on a mandrel and heated and twisted the cane down as I melted it around the bead. This technique allowed me to use the cane in its’ full size which made the cane pattern larger and more visible and I really liked the results. Instead of wispy twisted patterns of color, I got beefy twists that were more dramatic.
A photo of the punty and larger sized stringer that I pulled for an 8 mm cane, notice how it is wavy and this goes away when reheated.
If you like exotic stringers, I highly recommend trying some of this new shipment of zanfirico cane. It saves you from having to make it from scratch and it allows you to introduce details into your beads that are difficult to produce and very lovely to see.
 |
 |
| Blue spiral zanfirico over base of CiM Creamsicle with Peace and Cornflower dots | Blue spiral zanfirico over base of CiM Rose Quartz with an accent stringer of goldstone. |
 |
 |
| Pink spiral zanfirico stringer over bead made from Intense Blue. | Bead made with 6 mm zanfirico cane with multiple threads of blue and yellow that was warped around the mandrel and tips of Intense Blue were added for accents. |
 |
 |
| Blue spiral zanfirico stringer warped around a round bead made with CiM Pumpkin. | Round bead wrapped with 6 mm cane line zanfirico in black and white over a core of CiM Chalcedony. |
 |
 |
| Yellow line zanfirico over core of Intense Blue with dots of CiM Pumpkin and Cornflower, made with a 6 mm cane. | Pink line zanfirico over core of CiM Cornflower, made with a 6 mm cane. |
 |
 |
| Pink spiral zanfirico stringer over CiM Poison Apple. | Goldstone zanfirico with black line over a core of CiM Great Bluedini. |
 |
 |
| White line zanfirico stringer over CiM Tuxedo. When line zanfirico is pulled down to stringer size, the zanfirico can become very wispy. | Small round bead made with a 6 mm rod of blue spiral zanfirico. |
Click here to view current stock of Zanfirico.
 |